HyQuest Solutions Pty Ltd
WS200/WS300/WS500
Page
15 of 28
©
Copyright
FITTING
ANGLE
PLUG
TO
AME
R
GRAPH
CABLE
1. Slide nut and flanged bush onto Amergraph cable.
2. Wrap insulating tape around cable 25mm (1") from end, or fit heat shrink, 20mm (3/4") long.
3. Unwind outer layer of cable and cut off at tape.
4. Unwind inner cable layer back to tape, one strand at a time and cut off 3mm (1/8") in
front of the insulation tape.
5. Slide flanged bush forward and bend the short inner layer strands onto the bush.
6. Strip conductor insulation back to 8mm (5/16") in front of the flanged bush.
7. Coat copper conductor wire with resin-cored solder.
BE CAREFUL
not to heat wire
insulation. Cut wire back to 4mm (5/32") long.
ISSUE 3:11/6/19
