HyQuest Solutions HailSens IoT, Руководство пользователя

Страница: 15 / 23

© 2022 HyQuest Solutions 15
Configuration
3.1 LTE-M Wireless Data Transmission (MOBILE COMMS)
To use the integrated LTE-M modem for data transmission, a data SIM must be installed.
Initial settings must be made in order to use the HailSens IoT with the data SIM card installed. Use a SIM card that is
either exclusively for data communication or where data communication tariffs have been activated. Phone calls using
data communication require an exclusive app.
APN setup is required to connect to the Internet. APN is an access point for connecting to the Inter-net. It should be
configured according to the contract plan you have with your network operator. If APN setup has not yet been
performed on the communication device, be sure to perform APN registration.
For details see figure in topic Configuration , section: MOBILE COMMS.
Note : In some regions and depending on availability of data modems, the sensor can be equipped with a standard 4G LT
Cat1 modem. Contact your provider to make sure to obtain a compatible SIM card.
3.2 Ethernet Data Transmission (STATIC COMMS)
The factory setting is set to DHCP which allows to access the unit after connecting to the network providing an
according DHCP-Server. In case that this is not available, please install the supplied USB-Driver-Package to your
computer and connect it to the Mini-USB port of the integrated data logger/modem.
13 13