© 2022 HyQuest Solutions
14
Configuration
Section
Parameter
Comment
GENERAL/REST
SensorIdent
Sensor UUID
Service URL
http://tsoupload.kisters.de/Ha
ilsensUpload/rest
User
Username (authentication)
Pass
Password (authentication)
HailSens Calibration
Calparam 1 - 3
calibration settings; individual setting for
each sensor
Calibration Mode
Check to enter Calibration Mode
MOBILE COMMS
SIM-Pin
Pin of the inserted SIM card
APN
APN for inserted SIM
APNuser
APN User (if required)
APNpass
APN Pass (if required)
Authentication
Authentication Method
Connection Retries
Connection Retries
Connection Error Timeout
Connection Error Timeout
STATIC COMMS
IP-Adress
Fixed IP-Adress or address obtained by DHCP
NetMask
Netmask for IP-Adress
Network
IP-Mode (DHCP/STATIC)
Default Gateway
Default Gateway
Static Network Interface Mode
Check if cable-bound, uncheck for mobile
comms
Table 1 – HailSens IoT Configuration: Settings List
The network-mode (mobile or Ethernet) can by switched by checking the according box “Static net-work interface
active” in the “Static Comms” section.
The currently selected mode can be indicated by the red background of the according section (example in the figure
above: Static comms is active).
