© 2022 HyQuest Solutions
11
Installation
The position of the connectors is illustrated in the following figure:
Figure 6 – Connectors on top and right side of the Electronics Box
Figure 7 – Connectors at the bottom of the Electronics Box
2.5.1
Connecting the Ethernet cable
HailSens IoT is equipped with a specific RJ45 connector. To ensure waterproof protection, the outer RJ45 connector
must be sealed with the supplied cap or a connected cable with a waterproof cable gland. Two caps are delivered:
The round closing cap is used as along as no cable is fitted. Waterproof and weatherproof CAT6 RJ45 jack with RJ45
jack at the back (RJ45 pass through).
The conical cap is used with a cable. Threaded coupling for waterproof and
dustproof mounting on CAT6 RJ45 jack. Please use CAT6 cable with 7-9 mm OD for
dustproof and waterproof connection.
Simply slide this conical cap onto the open end(s) of the CAT6 cable. Crimp an RJ45
connector to the open cable end. Connect the RJ45 plug into the waterproof CAT6
RJ45 jack and screw this waterproof protector to the waterproof CAT6 RJ45 jack.
