© 2022 HyQuest Solutions
13
Configuration
3
Configuration
The HailSens IoT can be user-configured. Start the browser and enter the following URL:
http://192.168.2.2
The configuration dialogue opens in your browser.
Figure 8 – HailSens IoT Configuration Dialogue
The Network settings only apply to the Ethernet port and do not affect the USB-based network connection.
The parameters that can be edited by the user are listed and briefly explained in the following table.
After applying changes in the NETWORK section, a reboot of the device is required to activate the settings. To perform
the reboot, please disconnect the device from the power-source for at least 5 seconds.
