HyQuest Solutions BAROSSA DDT700, Инструкция по эксплуатации

Страница: 6 / 35

HyQuest Solutions Pty Ltd
DDT700
© Copyright
Page 6 of 15 ISSUE 6: March 20
Traversing Mode:
Barossa Winch shown in “traversing mode” that is the drum ring gears are in mesh and the drums
rotate in opposite directions when the operating handle is moved. In this mode, the traveller block
can be traversed in and out.
The traversing drum cradle pivots under the influence of the disengaging handle mounted on the
opposite side. To engage the drum gears, release the locking handle and whilst holding the disengaging
handle with the left hand, rotate operating handle slightly until gear teeth can be meshed, then move
disengaging handle down with the left hand and lock it in place.
A typical installation is depicted in the appendix. The layout shown in the appendix is based on
HyQuest Solutions standard steelwork components, all of which can be supplied ready for
installation. Alternatively, drawings can be provided for the components to be fabricated elsewhere.
However, as a minimum, the sheave block assembly should be purchased, please note customer has
to order the sheave block separately as it is not part of the winch order
.