HyQuest Solutions BAROSSA DDT700, Инструкция по эксплуатации

Страница: 3 / 35

HyQuest Solutions Pty Ltd
DDT700
© Copyright
Page 3 of 15 ISSUE 6: March 20
INTRODUCTION
The HyQuest Solutions Barossa double drum winch is based on the long established approach to
obtaining current meter observations and sediment samples in streams of moderate widths. The
principal advantage of the double drum concept lies with the ease of traversing, as the forces exerted
by the gauging weight are largely cancelled out. The winch exhibits state-of-the-art design features,
representing years of both in-house and field development. It comprises a rugged cast aluminium body
and cable drums, with stainless steel shaft components and corrosion resistant fasteners throughout.
OPERATION
The current meter can be fitted with a stabiliser tail fin which is attached to a hanger bar and Columbus
gauging weight in sizes of 7, 14, 23, 34, 45 and 68Kg. This assembly is suspended from the gauging
winch by the amergraph signal cable.
HyQuest Solutions provides a range of counters to operate with the winch. The models available are
CMC20A, CMCsp, PVD100, PVD200 and HydroTab/CMCbt.
Initial set up & Operational Procedure:
A typical installation is depicted in the appendix of this manual. The layout shown in the appendix
is based on HyQuest Solutions standard steelwork components, all of which can be supplied ready
for installation.
Alternatively, drawings can be provided for the components to be fabricated elsewhere.
However, as a minimum, the sheave block assembly should be supplied.