Hypnocube 8Square, Инструкция по эксплуатации

Страница: 8 / 21

HypnoSquare Instructions v 1.3, May 2009
- 8 -
Step 8: Large capacitors and inductor
There are 3 electrolytic capacitors to place.
These are all orientation
dependent - you will see a + symbol on the PCB for the positive wire,
which is the longer of the capacitor leads. The negative lead is also
marked on the body of the capacitor.
Both the 22uF and 220uF caps will need to be bent to keep them from
protruding too high, as seen in
Figure 19 .
The 22uF capacitor goes in C1, the 220uF in C3, and the 10uF in C9.
The inductor (
Figure 22) goes in the large round footprint marked
„167‟ as seen below. The orientation does not matter for the inductor.
Figure 21: Electrolytic capacitors and inductor in place.
Figure 18: 10uF electrolytic capacitor.
Figure 20: 22uF electrolytic capacitor.
Figure 19: 220uF electrolytic capacitor.
Figure 22: 330uH inductor.