User manual R3
DLCP
- 24 -
hough you can see the filter name that’s present in the DLCP, this can be readout under Help >
about.
4.7
Firmware update
4.7.1
DLCP
Every module has the ability to update its firmware, when Hypex provides a new firmware version.
The firmware can be simply updated by USB. Please remove or turn-off any connected amplifier first.
Under option “download” you can find “Firmware update”. When this option is selected the user can
select the new DLCP firmware file. This is a complete hex file provided by Hypex, no adapts can and
may be made by the user! After you selected the file the DLCP will enter its bootloader, the device will
reconnect and shows version 99.99 in the status bar. Now you need to select the file again to load
the new firmware into the module.
After the file is selected the update begins.
DO NOT DISCONNECT THE MODULE AT THIS POINT!
When the progress bar is filled the update is completed.
On a CRC error the update is automatically restarted, after three errors the update is aborted.
Note that the new firmware does not have any filters installed, so the filters must be reloaded with the correct
values.
4.7.2
Control board
The control board firmware can be simply updated by USB. Please remove or turn-off any connected
amplifier first. Under option “download” you can find “Control Firmware update”. When this option is
selected the user can select the new control board firmware file. This is a complete hex file provided
by Hypex, no adapts can and may be made by the user! After you selected the file the control board
will enter its bootloader, and the update begins.
DO NOT DISCONNECT THE CONTROL BOARD AT THIS POINT!
When the progress bar is filled the update is completed.
On a CRC error the update is automatically restarted, after three errors the update is aborted.
