User manual R3
DLCP
- 12 -
2.5.2.2
Menu structure
On power-up the controller receives
the source, volume and power infor-
mation of the first DLCP in the chain.
These settings will overrule the set-
tings of the other DLCP’s in the chain.
The controller keeps the volume,
source, power and mute settings equal
for all the DLCP’s in the chain. The
sources for the output channels can be
different for each DLCP. (e.g. to use all
six channels on the first DLCP for the
left loudspeaker, and the second DLCP
for the right loudspeaker)
If the input is set to USB audio, then
the input of the other DLCP’s in the
chain can be chosen in the DLCP x set-
up menu. The source for the other
DLCP’s in the chain can be set to
S/PDIF or CAT/AES (changeable in
hardware by J2 on the input board)
Figure 12
