HYPERVSN Masterbox, Руководство по эксплуатации

Страница: 31 / 40

© Copyright 2021 HYPERVSN. All rights reserved 31
The user will be provided with the information about the Device modes, once the
sigh has been selected.
Picture 42. Information about the Dev ices’ modes
Attention. To control the Wall Devices with the MasterBox connected via the Wall App,
the Player mode should be selected for them.
To select the mode:
1.
Go to Setup → Settings (Picture 41c).
2. Switch the Device mode switcher to “CMS” or “Player”. The chosen mode will be
set for all Wall devices connected.
Picture 43. Messages displayed once the mode has been selected
Note. Mode selection may also be performed with the Wall App.
10.6 ERASING CONTENT
To erase the content on the MasterBox and on the Wall Devices:
1.
Go to Setup → Settings (Picture 41d).
2. Click Erase All Content .
10.7 RESETTING THE MASTERBOX PARAMETERS
To reset the MasterBox to its default parameters:
1. Go to Setup - → Settings (Picture 41d).
2. Click Reset MasterBox .