18
© Copyright 2021 HYPERVSN. All rights reserved
7.
MASTERBOX AND WALL DEVICES
ACTIVATION
Note.
The appearance of web pages as presented in this Manual may differ to your setup
depending on the operating system and browser you use.
Attention.
If you have not registered your account in the HYPERVSN CMS, please read
for information on how to set it
up. Perform your CMS account registration before proceeding to the next step.
Before starting the MasterBox activation:
•
Define the details of the network(s) that you will use to connect the Device(s) to
the Internet via Wi-Fi.
•
Connect the MasterBox to your router, using an Ethernet cable (use the Ethernet
socket of the MasterBox,
•
Turn the MasterBox and your computer on.
Attention.
The router must have an Internet connection during activation of the
MasterBox.
7.1 MASTERBOX ACTIVATION
1.
Turn on the Hotspot switch of the MasterBox (Picture 10).
2.
Navigate to the Network and Internet settings on your PC. I
f you your PC has an
Ethernet connection with the router, interrupt it. Connect your computer via Wi-
Fi to the following network: wall-YYYYYYY, where YYYYYYY is the serial number
of your MasterBox, that is located on the MasterBox label. Use the
following
password:
0c3a71dad2
(the first digit is a zero).
3.
Open a browser. Type the following IP-address
192.168.0.1
into the browser
address bar.
Picture 13. Input this IP-address into the browser address bar
The window of the Web Manager will open (Web Manager is an internal
configuration software for the Device and the MasterBox).
4.
Click
Quick
Setup
