OVERLOAD
When the current exceeds 10A, the display flashes the message “WARNING, OVER/LOAD”, disconnect the
excessive load as soon as possible to avoid overloading and damaging the Power- Mate.
SPECIFICATIONS
NOTE: This unit is intended for operation @ 240Volts AC with a maximum load current of 10Amps.
Accuracy error for all ranges is below 2%, (typical accuracy is below 1%)
Note 1 : The VA and Power Factor accuracy is as specified when measuring above 2W.
Note 2 : Where the display shows more digits than the resolution specified, the accuracy
of any extra displayed digits is not guaranteed.
Legend Performance Technology PTY LTD
Customer Care: 1800 328 200
Internet: www.legend.com.au
Email: [email protected]
Setting
Range
Units
Resolution
Units
Rate Setting
0 – 99.999
c/kWh
G/Gas Setting
0 – 9.999
kg/kWh
Inbuilt Timer
1, 8, 12, 24
Hours
2, 5, 7, 14, 28
Days
Cost
0 – 999999
± $
0.01
c
Energy
0 – 99999
± kWh
0.01
kWh
G-Gas
0 – 99999
± kg
0.01
g
Volts
170.0 – 270.0
RMS
0.1
V
Amps
00.000 – 10.000
RMS
0.001
A
Power
0 – 2,400.0
± W
0.1
W
Apparent Power
0 – 2,400.0
VA
0.5
W
Power Factor
± 0.001 to 1
(dimensionless)
Leading/Lagging
Frequency
45-65
Hz
0.1
Hz
Run-Time measurement
99:23:59:59
Days:Hours:Min.:Sec.
V
A
