These estimated amounts are calculated from the average energy consumption of the appliance, derived from
the data collected during a measurement period.
The Meter screen displays simultaneously True Power (W), Apparent Power (VA), Volts (V), Amps (A), Power-
Factor & Frequency (Hz). Using “Zoom”, the meter screen also displays minimum and maximum values for V, A,
W & VA
Note: the minimum and maximum figures will not be updated if the PML is stopped or paused.
A click of the Run key will start or stop a measurement period, whilst a hold will reset (clear) the data in the
PML. When the PML is running, a flashing triangle icon shows on the top right corner of the LCD.
If the power fails during a measurement period, data is not lost and the PML resumes when power returns,
another icon though will show next to the run icon showing that the power was disconnected.
MAKING YOUR FIRST MEASUREMENT
Plug an appliance into the piggy-back plug of the PML and switch on the appliance. If you are not on the cost
screen, click the menu button a few times until cost is displayed.
Now hold the Run button until prompted “clear all data” click the button under “Yes”.
Now click the Run button to start your measurement. The cost screen will instantly update with the running cost
data for the appliance.
Note: devices with a thermostat, like a fridge, should be measured over a 24Hr period to obtain the best
accuracy.
Complete operating instructions and specifications can be downloaded from:
www.power-mate.com.au
WARRANTY:
This product is guaranteed against faulty components and workmanship for a period of 12 months from the
date of purchase. It is the responsibility of the purchaser to return the unit to the manufacturer or place of
purchase with a copy of the sales receipt or invoice when requesting warranty repairs to be undertaken.
After the warranty repairs or work is completed, the manufacturer will return the goods to the purchaser us-
ing the Australian Post standard parcel service at no extra cost to the purchaser. If insurance or registered or
express post is required, the cost shall be borne by the purchaser.
The Manufacturer is not responsible for goods lost or damaged by the Australian Post service. Great care was
taken to ensure the integrity of data and information and correct operation of this product. The Manufacturer
though will not accept any claims for data loss, financial loss or any other losses or consequential damage
resulting from the data, use or failure to perform of this product, no other guarantees are implied or given.
To obtain warranty service on your Power-Mate Lite, please send it, together with your full name and return
address, directly to the manufacturer:
Legend Performance Technology PTY LTD
8 Distribution Place
Seven Hills NSW 2147
Ph: 1800 328 200
Internet: www.legend.com.au
Email: [email protected]
Address
Date of Purchase
Place of Purchase
Invoice no.
Power-Mate Lite _Quick-Start_ Operating Instructions Rev1.06.odt
