Hypermedia HG-3000, Руководство по эксплуатации продукта

Страница: 71 / 122

Hypermedia Systems
Configuring LCR
Release 5.3 (June 2013)
61
< Specific Group Name >
All calls coming from Resources assigned to this Group are rerouted to the
selected Group. The LCR rules are not analyzed for calls entering the LCR
module from this group.
7. Select or clear the Int. Routing checkbox. When selected, all outgoing calls
through the group are logged. The logs are then checked to determine the
destination number for incoming calls. If a match is found, the original
destination number is ignored.
8. Select or clear the Report Calls checkbox. When selected, calls are sent to an
external Hypermedia application for billing.
9. Click Save Settings .
4.3.2 Using the Default Group Settings
The HMC includes pre-defined Group settings. These can be used instead of
customized settings.
To apply the default Group settings:
1.
From the HMC navigation pane’s LCR branch, click the
Groups sub-branch.
The Groups screen is displayed.
2. Scroll to the bottom of the screen. The Create Default Groups button appears
within the Default Groups prompt.
Figure 62. Create Default Groups Button
3. Click Create Default Groups .
4. Scroll to the top of the page.
5. Click Save Settings .