Hypermedia HG-3000, Руководство по эксплуатации продукта

Страница: 64 / 122

Configuring LCR
Overview
Hypermedia Systems Ltd
.
54
4.1 Overview
Gateways with Least Cost Routing (LCR) route calls based on rules created by the
administrator. This results in per-call routing. In contrast, when using gateways
without LCR, all call routes are fixed.
LCR enables greater customizing and, potentially, saves money. The best-practice
order of building the LCR plan is:
Note:
A best-practice is a technique or methodology that, through experience and research,
has been proven to efficiently and reliably lead to the desired result.
1. Link media to the LCR module
2. Create Groups
3. Assign the LCR Resources to Groups
4. Create Rules
The following are optional:

Create IN or OUT filters, to manipulate over dialed numbers

Create Time Frames, to determine the time of day each of the Rules is active

Configure the ACR, to analyze source and destination numbers and to enable
rout/block/manipulate actions
This section follows the best-practice order.