Hypermedia HG-3000, Руководство по эксплуатации продукта

Страница: 55 / 122

Hypermedia Systems
Configuring a Cellular Card
Release 5.3 (June 2013)
45
3.14 Call Limits
Use the Call Limits screen to configure various call-related timing parameters.
To set Call Limits:
1. From the Cellular Cards branch of the HMC navigation pane, click the Call
Limits sub-branch. The Call Limits the screen is displayed.
Figure 43. HMC Cellular Call Limits Screen
2. If more than one slot is displayed, select a specific Cellular Card. The Call
Limits screen of that cellular card is displayed.
3. Select or clear the following limits:
Set the limit for an outgoing cellular call to be answered
When enabled, enter a time duration (measured in seconds) that the gateway will
wait for the call to be answered before ending the call.
Set the maximum length of an outgoing call
When enabled, enter a time duration (measured in seconds) that is the maximum
permitted length of an outgoing phone call through any of the card’s cellular
channels. Calls are disconnected at the beginning of the last minute, rather than
its end.
Round the call length up to the maximum length
When enabled, a call counter for a specific cellular channel will be rounded up
to reflect the maximum length of an outgoing call through that channel (defined
above) when such a call ends, even when the conversation is shorter than the
maximum length.
Note:
Round the call up to the maximum length cannot be used with SIM Counters steps
(see section 3.12, Call Counter Steps).
4. Click Apply Settings and wait for Configuration Saved to be displayed.