Hyperflight X-res, Инструкция по эксплуатации

Страница: 6 / 37

X-RES
6 Of 37
Glue the fuse bulkheads with superglue. Make sure that these are perpendicular to the fuse sides.
Now two 4x4mm balsa longerons are glued in place on each fuselage side. Up to the wing saddle
(bulkhead 5) on top and to the nose on the bottom.
The two long bottom pieces must be scarfed together.
On forward fuselage, the lower piece is flush with the bottom of the 0.8 mm plywood reinforcement.
From the end of the plywood reinforcement, both the top and bottom 4x4 pieces are 2mm in from the
top and bottom edges of the sides. The top and bottom sheeting fits inside in this space later.
Assembled bulkheads and 4x4mm balsa longerons.
Use a spacer with 2 mm offset to locate the longerons.