Hypercom ICE 5000, Руководство по эксплуатации оборудования и установке

Страница: 32 / 54

Chapter 3
3-4 ICE 5000 and 5500 Hardware and Installation Operators Manual 940184-003, rev. B
Initialize the ICE Terminal
After the terminal receives a new program load, an initialization is required to start the terminal
operations. In other cases such as a new card type, an initialization is requested to update the terminal
parameters. An initialization takes approximately 30 seconds to complete.
During an initialization, the terminal automatically connects to the initialization host to receive the
downloading of the initialization parameters, known as the
terminal profile .
Step-by-Step
To initialize an ICE terminals:
Step Action Terminal response
After a program load, the terminal displays the following
prompt.
MAIN
TERMINAL SETUP
TESTS SUPERVISOR
1 Touch Initialize on the terminal display.
INITIALIZE
CORRECT?
YES OR NO
2 Touch Yes . The following screens appear.
COMMS
Dialing now
The terminal dials the host.
COMMS
Processing now
The terminal sends request information to the host.
Transaction Complete
The transaction is complete.
The terminal displays
the
Idle
prompt.