Hypercom ICE 5000, Руководство по эксплуатации оборудования и установке

Страница: 26 / 54

Chapter 2
2-4 ICE 5000 and 5500 Hardware and Installation Operators Manual 940184-003, rev. B
Self-Test and Diagnostics
Following a successful key injection, a double beep indicates that the terminal has automatically
initiated its self-diagnostic routine.
The software and download status of the terminal is displayed during the self-test, which lasts
approximately four seconds. During this time, if the terminal is loaded with the security key, the displays
shown in the following table are typical.
A memory page may be in one of the states shown in the following table.
Table 2-1. Self-test and diagnostics with software loaded
Description Terminal response
Software: Software name and version.
DLL: Tracks the number of downloads. This is
controlled by Term-Master.
OS: Operating System and version.
Terminal: Terminal ID number.
IDENTIFICATION
SOFTWARE XX_XXXXXX
DLL 00
OS T5KBOOTXXX
TERMINAL NNNNNNNN
WAIT SELF TEST
Installed memory is displayed. The display
indicates one megabyte of memory installed.
MEMORY PAGE STATUS:
BOOT: XXXX
01: AAAAAAAAAFFFFFF
17: FFFFFFFFFFFFFF
Table 2-2. Memory page states
Status Description
A Active: application resident
C Corrupt: checksum error
F Free
L Lost Communication
I Inactive
U Unknown
- No fit: not available for use