63
(3) Networks Configuration
There are 2 parts for OSPF Networks configuration.
l
OSPF Networks Summary
You can edit and delete the existed OSPF networks.
l
OSPF Networks Add/Edit
This sub configuration is used to configure all the networks, the maximum is 2.
IP Routing > OSPF > Interfaces
Item
Description
Interfaces
Mode
Select from
Off
or
On
to use or not to use the OSPF function in the
interface.
Interface
Select from
eth1(WAN Ethernet)
or
LAN
.
Authentication
Select from
none
or
md5
to approve authentication.
Note:
Please offer
Key
and
Key ID
when you select
md5
to use HMAC-MD5.
Key
The key used for authentication (maxlength=16).
Key ID
The ID of the key used for authentication (1-255).
Cost
The cost for sending packets via this interface (0: OSPF defaults).
Passive
Select from
Off
or
On
to send out or not to send out OSPF packets on
this interface.
www.e-rake.us.com
