116
The
VPN Network
and
VPN Netmask
are required fields.
Note:
The
VPN Network
should be network ID (e.g.
192.168.30.1
is invalid setting.)
When PC1 and PC2 communicate each other, the Route Client Networks should be enabled.
And add the LAN information of OpenVPN client side, in this case the
#1
route will be
10.0.0.0
and
255.255.255.0
Note:
The
#1
route means the routing information for
User 1
.
If all settings set up properly, the web UI will show the
Apply OK
and the OpenVPN server
status should be
Running
. When OpenVPN Client mode is connected, the status will show the
information which client is connected, IP address and connected time.
In the status, the
CN
field will indicate which client is connected and the
user-00-00@openvpn
value is from the
User 1
certificate information. You can check it by clicking the information
button, the web UI will display the window as the below figure.
The CN information of user certificate
is as shown in the subject field.
www.e-rake.us.com
