27
5.4.1 Alarm > Name Group
(1) How to create your group
l
Name a group
Click
Group
for naming and the interface will show the group’s name in
the Group setting as below.
System > Alarm
Item
Description
Mode
Turn on/off the Alarm configuration. Select from Disable or Enable. The
default is Enable.
Alarm Input
Select from SMS, DI 1, DI 2, VPN disconnect and WAN disconnect as
input to trigger alarm.
l
SMS:
It means team members on selected week day can send SMS
to the phone number of using SIM card to trigger alarm.
l
DI 1/2:
IO high to trigger alarm.
l
VPN disconnect:
All tunnels get disconnected then trigger alarm.
l
WAN disconnect:
All WAN connections get disconnected then trigger
alarm.
Alarm Output
Select from SMS, DO, SNMP trap and E-mail as alarm output.
DI 1 Trigger
Select from High or Low. The default is High Trigger.
l
High:
SW is On to trigger.
l
Low:
SW is OFF to trigge.
D1 2 Trigger
Select from High or Low. The default is High Trigger.
DO behavior
l
Always:
Pull DO high.
l
Pulse:
High and Low continuously.
Groups
Create your contact phone book for each group and edit your information
for each user.
SMS/E-mail
Write your messages and the messages limit 150 English characters to
deliver.
www.e-rake.us.com