manualshive.com logo in svg

HYOSUNG TE 50, Руководство пользователя

Поделиться
Скачать
HYOSUNG TE 50 Скачать руководство пользователя страница 36

35

◉

Tire Tread Condition

◉

Tire Pressure

A low pressure gauge is provided in tool kit under
the seat, 

S

o you can measure the air pressure in

your 

『

『

A

A T

T V

V

』

』

tires. Check the air pressure in all

tires before each use of the vehicle. Improper air
pressure can affect handling, maneuverability,
traction, tire life and rider comfort. Be sure that
the tires are inflated to the pressures shown
below. Tire pressure should only be measured or
adjusted when the tires are cold, or misleading
measurements can result.

Operating the vehicle with excessively
worn  tires  can  cause  skidding  due  to
decreased traction. It is recommended
that the front and rear tires be replaced
when  the  depth  of  the  tire  tread  is  4
mm (0.16 in) or less.

WARNING

COLD TIRE PRESSURE

FRONT

25 KPa

0.25 

㎏

/

㎠

3.6 psi

25 KPa

0.25 

㎏

/

㎠

3.6 psi

REAR

Using a high pressure air pump to fill
the tires can be hazardous.
If too much air is put into a tire, the
t i r e   m a y   b u r s t ,   c a u s i n g   s e v e r e
injury.  Use  a  manual  type  air  pump
to fill the tires.

CAUTION

◉

Tire Replacement

Air in the low-pressure  tube tire of this vehicle is
sealed by the contact surfaces of the inner wheel
rim and the tire bead. If either the inner wheel rim
or tire bead is damaged, air may leak. Be
extremely careful not to damage these sections
when replacing tires.

When breaking the tire bead loose from the
wheel, be extremely careful not to damage the
inner wheel surface or the tire bead.

It is very important to use the proper tools when
repairing or replacing tires, to prevent damage to
the tire bead or wheel rims. We highly recom-
mend that you have such work done by your
HYOSUNG dealer or a qualified tire repair sta-
tion.

◉

Tube Tire Repair

Should a leak or flat tire occur due to a puncture,
the tire may be repaired using a  plug  type patch.
If the damage is from a cut, or if the puncture
cannot be repaired using a plug, the tire should
be replaced. When operating your 

『

『

A

A T

T V

V

』

』

in

areas where transportation or service facilities are
not readily available, it is strongly recommended
that you bring a plug type repair kit and a tire
pump with you.

COPYRIGHTED

Содержание TE 50

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды