HYOSUNG TE 50, Руководство пользователя

Страница: 32 / 48

ENGINE OIL LEVEL
31
To change the oil :
1. Place the vehicle on level ground.
2. Remove the oil filler cap
①
.
3. Remove the oil drain plug ③ from the bottom
of the engine and drain the oil completely.
4. Reinstall the drain plug ③ .
5. Remove the clutch cover.
6. Remove the level screw
②
and pour fresh oil
of the specified type through the filler hole
until the oil flows out from the oil level hole.
Frequent use in wet conditions will
require more frequent oil changes. If
the vehicle becomes submerged in
water, immediately change the oil.
Failure to follow these instruction
may result in severe transmission
damage.
CAUTION
Never operate the
『 『
A A T T V V
』 』
without an
adequate amount of oil, if the engine
runs out of oil, it can stop suddenly,
c a u s i n g i n j u r y a n d / o r s e v e r e
mechanical damage.
WARNING
The engine oil tank is located under the seat.
Check the oil level each time before starting the
engine. If the oil level is low, fill up the tank with
the specified oil. The oil tank holds 1.0
ℓ
�
TRANSMISSION OIL CAPACITY
Replace
Overhaul
80
㎖
90
㎖
�
7. Refit the oil filler cap
①
and oil level screw
②
.
COPYRIGHTED