HYOSUNG MONiMAX8100QTN, Руководство оператора

Страница: 52 / 112

Chapter4. Receipt Printer (SPR60) Operator Manual
4-14 © Hyosung TNS Inc. All Rights Reserved.
Troubleshooting and maintenance
► If errors occur in the printer, consult the troubleshooting table below. If still can’t settle the trouble,
please contact with Hyosung TNS or the distributor.
Errors and settlement
►
Error index
Errors Description
Error LED
200m
s
Print head
overheating
Temperature of the print head is too high.
Abnormal voltage Input voltage is too low or too high.
Cutter error/paper
jam
Cutter can’t work normally or Paper jams.
Print head uplifting Print head is uplifted.
Paper end Paper sensor detects paper end.
Calibration failure Marked paper calibration error.
Paper near end Paper sensor detects paper near end.
Macro definition
execution status
In the execution of a macro definition.
Normal stand-by
status
<Note!>
In the default configuration, the printer will not stop printing when paper end, and the user could
change the default configuration as stop printing when paper end via KIOSK Utility software, and under
the new configuration, the error LED will flash and indicate paper end;
Printer executes the following activities when errors occur:
- Stop printing;
- Busy signal is available;
- Error LED flashes;