HYOSUNG MoniMax 5600T, Руководство оператора

Страница: 124 / 146

MoniMax 5600T 6. Appendix
6 - 29
Error
Code
Cause Handling
4004900
Dispensing 0 sheets required is
error(Separated rejection)
1. Check received command
2. Check communication cable
3. Check CDU Firmware Version
4004A00
TIME OUT (JAM)(Separated
rejection)
1. Remove jammed notes on CDU return path
2. Remove dust in CS11AB, CS21AB, CS31AB,
CS41AB, CS4AB, CS13 Sensor
3. Install after rearranging notes in cassette
4004B00
Continuous 10 times error if note is
long
1. Check state of notes in reject box
2. Rearrange notes in cassette
3. Check Index of notes
4. Check foreign objects in the main motor encoder slit.
5. Replace the CS8 encoder slit sensor
4004E00
Detected the remaining notes on the
return path during dispense reserved
operation
1. Initialize after removing the return path
2. Clean sensors on the return path (CS13)
4005100
Received a request for over 121
notes dispensing on the CDU from
the upper unit.
1. Check the CDU received command
2. Check the abnormal communication cable.
3. Check the CDU firmwave version and refer to
specifications.
4005200
The remaining notes at the sensor in
front of the CST after dispense
operation (CS11AB, CS21AB,
CS31AB, CS41AB)
1. Remove the remaining notes at a sensor in front of the
CST
2. Realign notes in the cassette
3. Check abnormal clutch.
4. Check abrasion of the cassette box pick unit.
4005400 CS1 Sensor Table Search Error
4005500
Timeout due to note’s length error
passed through the CS13 during
dispense operation
1. Remove a jammed note between the tray and CDU
2. Remove a jammed note at the position of the CS13
sensor
3. Remove a dust on the CS13 sensor
4005600
Abnormal operation of the gate
solenoid 1 during dispense operation.
1. Remove a jammed note on the gate
2. Remove notes in the reject box and remount the reject
box
3. Check if the CS3 sensor bracket is bended.
4. Check if the CS3 sensor cable is disconnected
5. Exchange a sensor after abnormal operating CS3
Gate detecting sensor.
6. Replace the reject solenoid 1
4005700
Sum check error of note index setting
value in the CDU CST of EEPROM
during initializing
1. Read the CDU version to check CDU CST note index
2. Reinitialize
3. Initialize after executing the CDU Information Set(‘P’)
Command
4. Replace the CDU board