HYOSUNG MoniMax 5600T Скачать руководство пользователя страница 38

Страница: 38 / 146

MoniMax 5600T

4. Operating Instructions

4 - 13

4) Take the reverse order of 1) ~ 3) to put Reject

Box together into cash dispenser again.

Make sure that Reject box is slowly

inserted into the cash dispenser in order to

automatically open the cover of reject box.

Otherwise, it will generate problems and the

error code will display on the monitor promptly

4.5 How to Clear Jamming in cash dispenser

1) Turn power off and pull the whole unit of cash

dispenser forward while pressing the

highlighted green button.

2) Move bills to the stacker temporarily by turning

the green knob clockwise and extract bills

from the stacker.

3) If there is a bill on transport path or presenter

around shutter, take it out carefully by using

the side of belt.

WARNING!!!

After taking the bill out, MAKE SURE that

position of belt will be orderly located. When

any belt is out of position within its roller,

please make it put on the roller surely.

Содержание MoniMax 5600T


















































































































































Результаты поиска

Содержание MoniMax 5600T

Отзывы:

HYOSUNG MoniMax 5600T, Руководство оператора, Страница: 38 / 146

Результаты поиска

Содержание MoniMax 5600T

Отзывы: