HYOSUNG MoniMax 5600T, Руководство оператора

Страница: 117 / 146

MoniMax 5600T 6. Appendix
6 - 22
Error Code Cause Handling
3001600
To show that the card staying inside
ICRW was moved up to the point where
status request information change. To
show that card was inserted into the
ICRW through rear side by external force
3001700
To show that the card was not carried to
the specific location after specified
number of trial for specified time during
execution of RETRIEVE command.
3001800
To show that shutter open/close
detection sensor(SW2) and card width
check sensor(SW1) are not operating
correctly.
3001900
To show that a card was not inserted
from the rear, even if 10 seconds had
passed after the execution of BACK
ENTRY command
3002000 To show that track has parity error
3002100
To show that read error has happened in
Multiple magnetic read command.
3002200
To show that write error is detected
through write/verify procedure.
3002300
To show that only SS,ES,LRC are
contained in the track. (no retry)
3002400
To show that the card has no magnetic
track(no retry)
3002500
To show that quality
error(Jitter,Preamble,Postamble) has
happended in write verify.
3002600 To show that the track has no SS.
3002700 To show that the track has no ES
3002800 To show that the track has no LRC error