HYOSUNG Aquil GV650, Руководство по обслуживанию

Страница: 188 / 222

7-43 CHASSIS
◉ REASSEMBLY
Reassemble the swingarm and rear shock absorber
in the reverse order of disassembly.
Pay attention to the following points :
● Install the swingarm and tighten the swingarm
pivot shaft, nut and swingarm mounting lock nut with
the special tool to the specified torque.
Swingarm pivot nut
① ①
: 50~70 N
∙ ∙
m (5.0~7.0 kg
∙ ∙
m)
Swingarm pivot shaft ② ②
: 15~30 N
∙ ∙
m (1.5~3.0 kg
∙ ∙
m)
Swingarm mounting lock nut (M26)
③ ③
: 70~80 N ∙ ∙ m (7.0~8.0 kg ∙ ∙ m)
Engine mounting socket wrench (M26)
: 09940H35010
● Install the rear wheel. (Refer to page 7-34)
● Adjust the following points :
Drive belt slack : Refer to page 2-15
CAUTION
Set the part
� �
of swingarm pivot shaft
② ②
align center line by the hand temporarily and
install the swingarm pivot shaft to the speci-
fied torque.
If otherwise, it is damage to the thread of
swingarm pivot shaft.
①
②
③
�