HYLITE MIGHTYLITE JOB LIGHT– INSTALLATION AND OPERATING INSTRUCTIONS
The Mightylite Job Light is compact and lightweight with an extremely tough polycarbonate casing. Utilizing the
latest bright LEDs. Making it perfect for use in all working environments.
The unit will function using 110/230 AC 50Hz using a adaptor cable.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL AND OPERATE
THIS LIGHT.
IMPORTANT INSTALLATION INSTRUCTIONS
IMPORTANT OPERATION & MAINTENANCE INSTRUCTIONS
DO NOT position the light near flammable or combustible materials (such as wood, cloth, paper) or near flammable,
combustible or explosive liquids, solids, gases or equipment.
DO NOT direct the light into a person’s eyes. This light has a very intensive light output, which if incorrectly used
could cause eye damage.
ALWAYS disconnect the power supply before servicing or performing any maintenance.
ALWAYS maintain the light in good condition, with repairs only undertaken by a qualified electrician.
ONLY carry out repairs using genuine parts. Non-authorized parts may be dangerous and will invalidate the warranty.
230V - 110V. Auto select. For 110V usage, use 110V plug with adaptor or
hardwire 110V plus
TROUBLE SHOOTING
If your Job Light does not operate after following all of the instructions, please try the following steps:
- Check that the ON switch is in the correct position
- Check that the battery is installed correctly.
- Check that the battery is charged (look at the charge level LED’s)
CONTENTS OF KIT
1, 1x Job Light
2, H stand, Handle & 4x rubber feet
3, Battery
4, USB Charger (500ma/1000ma)
5, Fixing kit
2x Long Knurled Bolt,
2x Plastic Washers
1x Mightylite Job Floodlight
1x H Stand Kit &
4x Rubber Feet
1x Battery
4x H Stand Clips
