EN © HYKKER.
All rights reserved.
Soundbar 2in1
21
7. USE
Do nothing forcibly, as this may result in damage to the device and void the warranty.
BEFORE THE FIRST USE
Incorrect connection of the power supply cable can cause damage to the AC adapter
or the device. All damages resulting from improper handling are not covered by the
warranty.
Remove the device and accessories from the
packaging. Due to its design, the soundbar can
be divided into two columns - in this form it is
delivered in the package. The columns are
designed with connectors and holes on their
lower part. To use the soundbar, connect the
speakers by inserting the connectors of one
into the holes of the other and then turn the
speakers against each other, as shown in the
picture. Once the soundbar has been properly
connected, connect it with a short connection
cable.
To use the device in the form of freestanding columns, place the stands on the lower
part of the columns, matching them with the corresponding connectors and holes, and
then twist the columns against the coasters, as shown in the illustration below. To use
the device in the form of free-standing columns, place the stands on the lower part of
the columns, matching them with the connectors and holes. There is also a possibility
of hanging the connected columns on the wall without stands.
Plug the power supply unit into the power outlet at the back of the unit (DC IN), and the
power supply plug into an electrical outlet. The red LED on the front of the device
