EN © HYKKER.
All rights reserved.
Soundbar 2in1
26
REPLACEMENT OF BATTERIES IN THE REMOTE CONTROL
1.
Pull out the battery cover on the back of the remote control.
2.
Remove the used batteries.
3.
Insert new (undamaged) batteries as indicated by + and - in the battery
compartment.
4.
Slide the battery cover in until the latch engages.
8. CLEANING AND MAINTENANCE
To extend the service life of the device:
1.
Keep the device and its accessories out of reach of children.
2.
Avoid contact with liquids; these may cause damage to electronic parts of the
device.
3.
Avoid very high temperatures for it can shorten the life of device electronic
components, melt the plastic parts and destroy the battery in the remote
control.
4.
Do not try to disassemble the device. Tampering with the device in an
unprofessional manner may cause serious damage to the phone or destroy it
completely.
5.
For cleaning use only a dry cloth. Never use any agent with a high
concentration of acids or alkalis.
6.
Use the original accessories only. Violation of this rule may result in an
invalidation of the warranty.
9. TROUBLESHOOTING
In case of any problems with the device, please refer to the following tips.
The device does not
switch on.
Make sure that the power supply is connected to the device and to a
power outlet.
Check the power switch for damage.
Check that the power outlet is not damaged and that there is electricity
(the fuse can be switched off).
If you connect the device via the power strip, make sure that it is
functional and that all connectors in it work properly.
Check if batteries are not worn out.
Check that there are no obstacles between the soundbar and the
remote control.
There is no sound,
even though the
sound source is
connected.
Check if the soundbar is on.
Check that the soundbar does not have the sound disabled (MUTE
function or minimum audio gain).
Check the output on the audio source - connect the cable to another
source.
Check the connection cable. If it is damaged, use another.
