Page 55
11.5 Navigation within a menu
User level entry
Standard display during normal operation is
actual steam output in the selected dimen-
sion ([kg/h] or [lbs/h], respectively. By press-
ing any key, user level comprising a reading
value index (pointer) selection level and the
reading values as such is entered.
„r01“ is displayed indexing the first reading
value.
Reading value display
By scrolling using the keys, the read-
ing value indexes „r01“ to „r15“ , code entry
„P00“ (s. below) and parameter selection
„PAr“*) may be addressed. The actual rea-
ding value content is output on pressing the
SET key after selection of one of the reading
value pointers r01 to r15.
Use the ESC key for return to the reading
value index level that allows for addressing
further reading values.
„P00“ allows for inputting a code for provider
level entry that supports changing of the
parameters (s. next section). This function is
not meant for usage by the steam humidifier
user.
*) „PAr“ ist only presented when a „10“ was
input as the „P00“ setting value for access to
provider level. When „PAr“ is confirmed with
the SET key, parameter group selection is
supported without the need for inputting the
access code again.
Provider level code entry and setting a
parameter
»
Using the keys, scroll until
„P00“ is displayed and confirm with
the SET key. „00“ is displayed.
»
Increase the display to „10“ using
the keys and confirm with the
SET key („10“ is the access code for
the provider level). „1- “ is now dis-
played for selection of one of the
parameter groups (1) to (6).
»
Confirm parameter group (1) with
the SET key or make an other selec-
tion with the keys and then
confirm. The display will now show a
„1“ in the right digit position for ad-
dressing the parameter index (e.g.,
„2-1“).
»
Confirm selection with the SET key
or vary selection with the
keys and then confirm.
Use the ESC key for return to the previous
input level.
<
<
„ / “
<
<
„ / “
<
<
„ / “
<
<
„ / “
<
<
„ / “
