5 Putting
into
Operation
Important
Charge the battery of the instrument completely, before you use the
device without power pack. This assures the complete performance
of the battery.
Plug the round connector of the power pack into the power supply jack of the
MultiHandy 3020 (see section 4.2).
Plug the mains connector of the power pack into a socket.
Charge the battery of the instrument at least 10 hours without interruption.
Cut all connections of the power pack.
6
Switch On and Off
Information
Charge the battery at least 10 hours without interruption, before you
use the instrument without power pack. This assures the complete
performance of the battery.
6.1 Switch
On
Press the key [ON] for about 0.5 seconds.
After two seconds this screen will be displayed:
MultiHandy 3020
(1045772 values)
Init
1.0a
SN: 1
Hydrotechnik GmbH
After a few seconds the measured value display appears:
p1
[bar]
236.4
0
p2
[bar]
55.9
0
Q1
[l/min]
213.4
0
dp1
[bar]
180.5
0
•
•
•
•
1.
2.
3.
MultiHandy 3020
Operating Instructions
8
Operating Instructions MultiHandy 3020 • © Hydrotechnik GmbH • All rights reserved
