*** Enable MinMax ***
C1 (p1 ) : no
C2 (p2 ) : no
C3 (Q1 ) : no
C4 (dp1) : no
C1 - C4 : all
[
▼
] [
▲
] Highlight a channel.
Press [Enter] to toggle between „yes“ (MinMax is displayed) and „no“ (MinMax
is not displayed).
Repeat steps 4. and 5. for all desired channels.
[
▼
] [
▲
] Highlight „C1 – C4“ and press [Enter] to toggle the MinMax display for
all channels simultaneously.
Press [ C ].
7.4.3 Delete
MinMax
Use this command to delete the MinMax buffer. After deleting, the measuring instrument will
start instantly to store the new minimal and maximal values.
Press [Menu].
[
▼
] [
▲
] Highlight „Display“ [Enter].
[
▼
] [
▲
] Highlight „Delete MinMax“.
Press [Enter] to delete the MinMax buffer. Dashes „-----“ will be displayed in
this line of the display during the deletion process.
7.4.4 Set
Contrast
Use this command to tune the contrast of the display.
Press [Menu].
[
▼
] [
▲
] Highlight „Display“ [Enter].
[
▼
] [
▲
] Highlight „Contrast“ [Enter].
[
▼
] [
▲
] Set the desired contrast level [Enter].
7.4.5 Set
Display
Rate
This function defi nes, how often the display is updated with new measured values.
Press [Menu].
[
▼
] [
▲
] Highlight „Display“ [Enter].
[
▼
] [
▲
] Highlight „Display rate“ [Enter].
[
▼
] [
▲
] Select the desired display rate [Enter].
4.
5.
6.
7.
8.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
MultiHandy 3020
Operating Instructions
Operating Instructions MultiHandy 3020 • © Hydrotechnik GmbH • All rights reserved
17
