7.4.6 Set
Illumination
With this command you can modify the illumination of the display.
Press [Menu].
[
▼
] [
▲
] Highlight „Display“ [Enter].
[
▼
] [
▲
] Highlight „Illumination“ [Enter].
[
▼
] [
▲
] Select the desired illumination level [Enter].
7.5 Display
Measured
Values
After terminating the defi nition of the parameters, press [ C ] (repeatedly), to leave the ope-
ration menus. Then the current measured values will be displayed:
Four channels with MinMax values
p1^ 83.5/ 135.7
φ
Measurand p1, ^ indicates MinMax values 83.5 resp. 135.7
122.2 [bar]
current measured value of p1. units in [ ]
p2^ 37.3/ 148.6
Measurand p2, ^ indicates MinMax values 37.3 resp. 148.6
51.1 [bar]
current measured value of p2. units in [ ]
Q1^ 254.7/ 339.3
Measurand Q1, ^ indicates MinMax values 254.7 resp. 339.3
301.4 [l/min]
current measured value of Q1. units in [ ]
dp1^ -23.8/ 84.89
Calculated variable dp1, ^ indicates MinMax values -23.8 resp. 84.89
71.11 [bar]
current value of dp1. units in [ ]
The icon
φ
indiscates that the power supply is achieved from the power pack.
Four channels without MinMax values
p1
[bar]
122.4
Measurand p1, current measured value of p1
units in [ ]
p2
[bar]
51.1
Measurand p2, current measured value of p2
units in [ ]
Q1
[l/min]
338.2
Measurand Q1, current measured value of Q1
units in [ ]
dp1
[bar]
71.22
Calculated variable dp1, current value of dp1
units in [ ]
The icon indicates that the instrument is supplied by battery. Here the battery charging
level is approximately 50 %.
Two channels without MinMax
p1
[bar]
122.4
p2
[bar]
51.1
1.
2.
3.
4.
MultiHandy 3020
Operating Instructions
18
Operating Instructions MultiHandy 3020 • © Hydrotechnik GmbH • All rights reserved
