8.2.1 Start
Recording
Press [Menu].
[
▼
] [
▲
] Highlight „Recording“ [Enter]:
***** Speichern *****
Start recording
Delete meas. data
De
fi
ne parameters
View parameters
Available memory
[
▼
] [
▲
] Highlight „Start recording“ [Enter]:
** Start recording **
M01: 290509-10:34
Note :
Start
With the next recording, the series of measurements „M01“ will be created. The
fi le will be automatically named with current date and time.
If you want to enter a different name, highlight the line „M01: ...“ and press
[Enter].
Enter a name. Characters are entered in the same way like at a cellphone. For
an „N“ press [ 6 ] twice, for an „Y“ three times [ 9 ]. Pressing [Menu] alters
between capital and small letters. Press [ C ] to abort the input and use [
▼
]
[
▲
] to jump to the prior / next digit. The special characters @, © and & can be
entered by pressing [ –. ].
Confi rm the name with [Enter].
[
▼
] [
▲
] Highlight „Note“ [Enter].
Press [
▼
] [Enter].
Enter a note, if desired. This will be saved in the measuring data fi le and is
available when evaluating the data at the PC. Confi rm the note with [Enter].
[
▼
] [
▲
] Highlight „Start“.
Press [Enter] to start the recording.
If no trigger has been defi ned, the recording with the programmed parameters starts in-
stantly. If a channel has been defi ned as trigger, the recording starts, after the trigger value
has been exceeded or fallen below. If „Key“ has been defi ned as trigger, the recording starts
after you have pressed [ –. ].
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
MultiHandy 3020
Operating Instructions
24
Operating Instructions MultiHandy 3020 • © Hydrotechnik GmbH • All rights reserved
