- 5 -
The corresponding menu sequence is retrieved with the button
and the respective sub-
menu shown.
Mode of operation
The operator can select between 3 different operation modes for the HY-
MAG
water conditioning
units.
Continuous
operation
HY-
MAG
operates on a continuous 24 hour/day basis
Timer control
The control box is in standby mode (LED standby). Switch-on and
–off times
are controlled by the internal timers.
One switch-on and
–off time per day can be programmed.
Operation off
No operation of HY-
MAG
- no water treatment/conditioning. Such operation
mode shall
not
be selected and set for normal operation but exclusively for
test mode!
The above operation modes can be selected by pressing the buttons
and the correct
mode then be confirmed and acknowledged by pressing the button
once.
The control box and/or monitoring returns automatically to main menu after the setting has
been confirmed.
Operating hours
The operating hours of the HY-
MAG
unit are registered by 2 separate counters.
Absol. value: Total operation time of HY-
MAG
unit in the actual installation.
(Operation hours since start-up). Standby-times are not registered and
thus, not shown.
Relative value Operating hours of unit counted from a certain period of time.
The counter can be reset by the operator. (Operating hours since
last reset).
The below display is shown after the main menu sequence
‘operating hours’ is retrieved:
Operation mode
Continuous operation
Operation mode
Timer control
Operation mode
Conditioning off
Oper. hours abs 000250
Oper. hours rel 000015
