Hydro-Probe XT User Guide HD0538 Rev: 1.6.0 21
2.5
Screw conveyor mounting
The sensor should be mounted either at the flute-less end of the conveyor or, if this is not
possible, the last section of the flute should be removed. The sensor should be mounted
using a Standard Mounting Sleeve in the side wall of the conveyor. The main body of the
sensor should be mounted at an angle of 60° to the flow.
•
The probe should be positioned close to the bottom of the conveyor so as much
material as possible can pass over the ceramic face
•
The probe should be inserted so that the centre of the ceramic is in the centre of the
flow
•
The ceramic faceplate should be completely covered by a minimum of 100mm depth
of material during measurement
•
An accessible sampling point should be installed approximately 150mm downstream
of the sensor
•
To aid calibration, a manual switch should be fitted close to the sampling point to
switch the average/hold input. This will enable the readings to be averaged over a
period of time whilst collecting samples and so give a representative Unscaled
reading for the sample collected for calibration. (see Chapter 3 for connection details)
Output
Input
Flow
Direction
Sampling point
Averaging switch
Flute removed
Figure 12 - Mounting the Hydro-Probe XT in a screw conveyor
Содержание Hydro-Probe XT
