C
:
Next take the Flow Restrictor/Flush Kit Assembly and install it on the system by pushing the short
piece of pre-installed black tubing on the Flow Restrictor/Flush Kit Assembly into the open black
quick connect fitting on the ASOV.
Note:
When starting up the system for the first time, make sure that the blue valve an the Flow
Restrictor/Flush Kit Assembly is in the open position (parallel with tubing). In order to flush the carbon
pre-filter properly, run for 2 - 3 minutes and discard all water. It is recommended to power flush the
system once a week for 5 minutes. This will help remove scale build up on the membrane.
D
:
Once the initial flush is complete turn the blue valve on the Flow Restrictor/Flush Kit Assembly
to the closed position (perpendicular to the tubing).
The blue valve should be in the closed
position for normal operation.
D
STEALTH-RO300 SETUP: FLOW RESTRICTOR/FLUSH KIT ASSEMBLY, CONT.
ASOV
C
8