HydroHoist HarborHoist 12000, Руководство по эксплуатации

Страница: 2 / 18

Rev A 2003215
Damage to your lift or vessel can result
from improper initial setup of the system.
Consult a HydroHoist Certified Installer for
initial setup and support

Installation and service should be performed by a qualified service professional.

To avoid the risk of electric shock make sure the control is disconnected from any power supply during
installation.

The GFCI supplied with your control is designed for outdoor applications but is NOT to be submerged or
directly sprayed with water. Keep the GFCI from being directly sprayed by the exhaust port of the con-
trol.

Verify that your power receptacle is clean and is supplying between 110VAC –120VAC with at least 15
amps of service.

Keep children away.

Do not allow yourself to be distracted or walk away from the lift during operation.

Do not overload the lift. Make sure your boat bilge pump is set for automatic. Significant water accumu-
lation in the bilge may overload the lift.

Make sure any ballast tanks are empty before lifting the boat.

Lift is not designed for lifting people.

No persons should be under the boat while it is in the suspended position.

Weight must be distributed equally side to side and bow to stern before lifting, otherwise the boat will
not center properly and appear to be misaligned on the lift.
Symbols:
Informational purposes
WARNING