HydroHoist HarborHoist 12000, Руководство по эксплуатации

Страница: 15 / 18

Rev A 2003215
Troubleshooting
Control will not power on

Verify GFCI has not tripped

Verify GFCI on dock receptible has not tripped. Verify dock power is on

Verify cable or power connection is not damaged (unplug before inspection)
Over time the lift lowers on its own

Leaky air hose, tank or fitting

While operating DO NOT unplug the control, doing so will allow the valves to remain open.
When operating press
STOP then wait 5 seconds before unplugging control. This will allow all
valves time to close properly before power is removed
Lift is not lifting the vessel level

Re-position the vessel on the lift

Verify weight is distributed evenly in the vessel

Verify ballast tanks, bait or live wells do not have water remaining in them

Verify the lift raises level when vessel is not on the lift

If lift is not level, verify sensor is connected to the frame properly and no damage has
occurred to it or its cable

The level sensor may need to be calibrated back to zero level (See Calibrating the level
sensor to zero level on instructions)
PORT and STARBOARD LEDs will flash together rapidly on the control

The level sensor has lost communication with the control. Contact your local dealer or Har-
borHoist customer service support for assistance