HydroHoist 18000 Long, Руководство по установке

Страница: 44 / 51

44
Rev. 07142020
Commissioning the Lift
Damage to the lift or vessel can result from improper initial setup of the system.
Consult a HydroHoist approved installer for initial setup and support.
•
Installation and service should be performed by a qualified service professional.
•
To lessen the risk of electric shock, disconnect the control box from power during installation.
•
The GFCI supplied with the control is designed for outdoor applications but is NOT to be submerged or
directly sprayed with water by the exhaust port of the control box.
•
Verify that the power receptacle is clean and supplies the proper current for the controller.
•
Keep children away from setup and assembly.
•
Do not become distracted or walk away from the lift during operation.
•
Do not overload the lift. Make certain your boat ’ s bilge pump is set for automatic. Significant water
accumulation in the bilge may overload the lift.
•
Make sure ballast tanks are empty before lifting the boat.
•
Lift is not designed to hoist the boat with people in it.
•
Never allow a person to be under the boat and/or hoist.
•
Weight must be distributed equally side to side and bow to stern before lifting. Otherwise, the boat will
not center properly and could be misaligned on the lift.
Before commissioning the hoist, read the Operation Manual completely to familiarize yourself
with all the functions and features of the control box.
IF your control was purchased after July 2020 please reference the HarborHoist Triton Owner Operator
Control Manual.