9
Step 3: Put the cross tubes onto the floats.
•
Attach the ends of the two cross tubes to one of the floats with two black clamping knobs, as
shown, keeping the knobs loose.
•
Align both floats the same and attach the other of the cross tubes with two black clamping
knobs.
Step 4: Put the bike frame onto the cross tubes.
•
Locate the front ends of the floats.
The front ends of the floats are inscribed with the raised warning about wearing personal
floatation devices.
IMPORTANT! Be sure the floats are position correctly. The EXPLORER
®
will not
provide optimum balance and stability when the floats are not oriented properly.
•
Set the bike frame on the cross tubes so
the rudder is toward the front of the floats.
Line up the holes on the bike frame with
the holes on the cross tubes, as shown.
•
If assembling with “SIDE-DECKS”,
remove both knobs from one float,
set “SIDE-DECK” on cross tubes,
and re-attach knobs.
