10
Step 4 (continued):
•
For each of the four frame holes, insert a bolt through rubber washer as shown. Next insert
bolt through the bottom of the cross tube, bike frame and side deck and attach with the black
clamping knob. Hand-tighten only.
Do not use a wrench to tighten the black clamping knobs.
Hand tightening is all that is necessary. Using a wrench or other tools may damage the knobs.
Note: Four rubber washers are used; there is one extra rubber washer and knob included.
Do not use a hammer or other tool to line up the holes of the bike frame and the cross tubes.
If the holes do not line up, make sure you have followed the steps properly.
