Hydro systems SuperDos 30 0.3%, Руководство по эксплуатации

Страница: 11 / 22

11
Step 1. Unscrew LOWER
END CYLINDER ASSEMBLY
from body. Remove LOWER
END CYLINDER ASSEMBLY Step 3. Pry the #15 SEAL
RETAINER from the injector.
Pry #17 O-ring from the unit.
NOTE: O-ring may still be
seated at the base of the unit. Step 2. Rotate #51 SHAFT 90º
and pull from body.
Step 4. For 2.5% & 5%
Replace #44 DOSAGE PISTON
flared-end up and #14 O-ring.
Step 5. Reinsert #15 SEAL
RETAINER and #17 O-ring
onto # 51 SHAFT ASSEMBLY.
Step 6. Reinsert #51 SHAFT
ASSEMBLY into body and rotate
90º to lock. Confirm the shaft is
locked in by gently tugging
on the shaft. Shaft should
remain inserted. Step 7. Screw LOWER END
CYLINDER ASSEMBLY onto
body. Ensure #16 gasket
is seated on the top of
cylinder assembly.
Step 4b. For 0.03%.
Replace LOWER SHAFT
assembly into upper shaft. Step 4a. For 2.5% WSP
Pinch and pull #44 DOSAGE
GASKET over the retainer lip.
Slide off the #51 shaft assembly.
Routine Maintenance
Instructions