Complete Sprayer Diagram
1. Fill chemical container with desired chemical and place container in the Flexi
Pro Sprayer.
2. Place the chemical feed hose into the chemical container and secure the cap.
3. Connet the Power Cord to the FlexiPro Sprayers Power Jack.
4. Plug the Power Cord into a 115/120 Volt wall outlet.
5. Turn the switch to the ON position and spray into a container until pump is
primed. Turn the switch to the OFF position.
(Properly dispose of the sprayed chemical.)
6. Place the proper size jet on the spray gun for the present application. Move
the sprayer to the location where the sprayer is to be used.
7. Turn the switch to the ON position and spray chemical as needed. When the
job is completed, turn the switch to the OFF position.
8. Remove the chemical feed hose from the chemical container and replace the
solid cap for storage.
9. Place the chemical feed hose into a container filled with water.
10. Turn the switch to the ON position and spray into a container until the
chemical is flushed out of the pump and hoses.
(Properly dispose of the sprayed chemical and water.)
11. Turn the switch to the OFF position.
12. Unplug the Power Cord from the wall outlet, disconnect cord from the
FlexiPro Sprayer and return cord and sprayer to the storage area in your van.
Operation
13
4
*lid is included