21: CTS 400 Flex Owner’s Guide
TILE/STONE CLEANING PROCEDURE
1.
Follow the start-up procedure.
2.
Connect a garden hose to the truckmount. If a pump in pump is used, turn the AUX
switch to the “ON” position (see Figure 2).
The water box must be full prior to starting the truckmount.
3. Connect all solution and vacuum hoses, and the APO hose (if equipped).
4.
Select “TILE/STONE CLEANING” on the Solution Control switch (see
Figure 4).
Figure 4. Select “TILE/STONE” on Solution Control Switch
TILE/STONE
Selection
