manualshive.com logo in svg

HydraMaster Boxxer 318HP, Руководство пользователя

Поделиться
Скачать
HydraMaster Boxxer 318HP Скачать руководство пользователя страница 59

5-11:  Machine Maintenance

The reclaimed antifreeze solution may be used three times before being 
discarded.

To freeze guard the hoses and wand perform step 7 with the items to be freeze 
guarded attached.

Recovering Antifreeze for Re-Use

1.  Attach all hoses and wands which have been freeze guarded to the truckmount.
2.  Attach the incoming water source to the front of the truckmount.
3.  Start the truckmount.
4.  Spray the solution through the hoses and wands into a sealable container until all 

signs of antifreeze are gone. 

Freeze Protection of the Pump-In System

1.  Drain the fresh water tank.
2.  Remove the garden hose adapter from the pump-in pump hose and position the 

hose so it is pointing outside the van.

3.  Turn on the pump-in pump and run for 1-2 minutes until all the water is purged from 

the hose.

The next time the truckmount is used it may take a few minutes before the water 

box begins to fill.

Содержание Boxxer 318HP





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды